3
2 BEFORE USING
Please read these instructions carefully before using this product.
1. This product needs to be grounded. This will avoid malfunctioning and will lower the risk of
electric shock. The product has a 3-pin power cable with a conductor and plug with a
ground wire. It is important to plug in this product with its own power cable into an
appropriate electrical outlet.
2. CAUTION: a wrong connection to the equipment or without grounding could result in an
electric shock. Consult an electrician if you do not have an electrical network with grounding
or a specific electrical outlet. Do not change the product's power cable.
3. Protect the equipment from water or any other liquid.
4. Install the product in a well-ventilated place.
5. Keep the product away from sources of heat or other products that produce heat.
6. Unplug the product if you are not going to use it for a long period of time.
7. Do not pull the wire when unplugging the equipment; pull firmly at the plug.
8. Do not put anything on top of the power cable, neither install it in a place of high traffic of
people or equipment since this could crush or damage it in some way.
9. Protect the product from being dropped or hit.
10. If the product presents any problem or you notice a drop in its performance, bring the
product to the technical assistance support closest to you.
11. Do not open the product neither try to check it or change it. Any problem that may arise
should be fixed by the technical assistance trained staff.
12. CAUTION: This product can generate sound levels that can cause permanent hearing loss.
Do not use the product for long periods of time at a high volume or at uncomfortable levels.
Mark an appointment with an ear doctor in the case of hearing loss or discomfort.
13. The device should only be cleaned with a dry, soft rag. A soft-bristle brush can help clean
the harder-to-clean areas. Never use solvents such as alcohol or gas for cleaning the
device.
14. Use the product correctly and clear up all doubts about the product using this manual. This
will keep the equipment from being used incorrectly or from getting damaged. Remember
that it is the user's responsibility if the equipment is used incorrectly.
