Selectronic WM1400-12V, Owner'S Manual

Page: 17 / 20

17
WM1400 ELECTRICAL SPECIFICATIONS
INVERTER TYPE
PWM Full Bridge power stage, with true sine wave AC output.
SELECTRONIC WM1400 INVERTER SPECIFICATIONS
ELECTRICAL
PARAMETER WM1400 CONDITION
Output Power
@ 25 °C Ambient 1,400 watts
1,800 watts
3,600 watts Max Continuous
1/2 Hour Rating
Max Surge
Output Power
@ 40 °C Ambient 1,200 watts
1,600 watts
3,600 watts Max Continuous
1/2 Hour Rating
Max Surge
Voltage Input Range 10 - 17V DC Range
Input Current 0.05A DC
0.7A DC
136A DC
349A DC
Stand By
Inverter ON – No Load
Max Continuous 25
°
C
Max Surge 25
°
C
Demand Start Sensitivity
Response Time
Factory Setting 4-16W
1 Second Max
4W
User Adjustable
Factory Setting
Low Voltage Shutdown
High Voltage Shutdown
Factory Setting
(Low Voltage Shutdown) 10 – 11.5V DC
17V DC
11.0V DC
User Adjustable
Fixed
Factory Setting
Output Voltage 240V AC +/- 4% @ Nominal DC Input,
No Load to Full Load
Output Current 5.8A AC
15A AC
Max Continuous
Max Surge
Output Wave Shape
Output Frequency
Total Harmonic Distortion
Efficiency True Sine Wave
50Hz +/- 0.01%
< 4%
Peak 91% Full load 85%
Power Factor Limitations Nil
Input / Output Isolation 1,875VAC
Memory Retention Permanent
Operating Temperature Range -10 °C to 50 °C
Conforms to standards
AS 3100 (wiring), AS 3108, C tick
MECHANICAL
Size 410mm wide x 175mm high x 342mm deep
Weight 14kg
Weight Packed 17kg
Input Lead Length 1.5 metres
Output Wiring Method Three terminal junction box with conduit knock outs
Chassis Powder coated zinc steel (Wedgwood Blue)
DC Isolation Single Pole Circuit Breaker ( Non auto )
Warranty 5 year parts and labour (Conditions apply)
Notes:
The above specifications are based on unity power factor.
The DC Input is electrically isolated from the AC Output.
Through a policy of continued development, specifications are subject to change without notice