Product Warranty Conditions
LD450-12 Specifications
Warranty
Selectronic Australia Pty Ltd warrants your inverter to be free from
defects in materials and workmanship under normal use and service,
for an initial period of two (2) years. Defective parts will be replaced
or repaired free of charge within this period.
Conditions
This warranty is applicable only from the date of original purchase.
The provision of this warranty shall not apply if the unit has been
subject to misuse, neglect, act of God, accidental damage or has been
used for a purpose for which it is not intended.
Unauthorised modification or repair will void your warranty.
To ensure a smooth and speedy response to your warranty claim,
please complete and return your reply paid warranty card within 30
days from date of purchase.
Within Australia & New Zealand
The inverter must be returned, at the owner’s cost, to an authorised
service centre listed in this manual. There will be no charge for the
return of the inverter.
Outside Australia & New Zealand
Product purchased for use outside Australia & New Zealand must be
returned to Selectronic Australia’s Service Centre to enable warranty
claims to be processed. Freight cost to be borne by the customer. No
charge will be made for the product return.
LD450-12 Manual
Selectronic Australia
16
Inverter Type
Microprocessor control circuit with PWM full bridge power
stage. True sine wave AC output
Current draw from Battery
Condition
Amperage
Demand Start SLEEP mode (average)
Inverter ON, with no Load
Maximum Continuous Load (450 Watt)
Half hour rating (560 Watt)
Surge rating (1350 Watt)
0.06 Amps
0.60 Amps
45.0 Amps
56.0 Amps
113 Amps
Inverter Power Ratings @ 25
º
C
Total Inverter output
Condition
Wattage @ 1.0pf
Current
Continuous
Half hour rating
Surge rating (5 seconds)
450 Watt
560 Watt
1350 Watt
1.9 Amps
2.3 Amps
5.6 Amps
Demand Start
Type
Minimum Load to Start
Response Time
Pulsing AC
4 watts – 16 watts user adjustable
1 second maximum
Battery Voltage Range
Voltage
Low DC Volts Cut Out–10 second delay
Low DC Volts Cut In
High DC Volts Cut Out–Instantaneous
10 – 11.5 volts user adjustable
12 volt
17 volts
LD450-12 Manual
Selectronic Australia
15
