background image

TROUBLESHOOTING

NO PICTURE, NO SOUND

1. Check if the fuse or circuit breaker is working.
2. Plug another electrical device into the outlet to 
    make sure it is working or turned on.
3. Power plug is bad contact with the outlet. 
4. Check the signal source.

NO COLOR

1. Change the color system.
2. Adjust the saturation.
3. Try another channel. Black-white program may 
    be received.

REMOTE CONTROL DOES NOT WORK

1. Change the batteries.
2. Batteries are not installed correctly. 
3. Main power is not connected.

NO PICTURE, NORMAL SOUND

1. Adjust the brightness and contrast.
2. Broadcasting failure may happen.

NORMAL PICTURE, NO SOUND

1. Press the volume up button to increase volume.
2. Volume is set to mute, press MUTE to restore 
    sound.
3. Change the sound system.
4. Broadcasting failure may happen.

UNORDERLY RIPPLES ON THE PICTURE

It is usually caused by local interference, such as 
cars, daylight lamps and hair driers. Adjust the 
antenna to minimize the interference.

BLANK SCREEN IN VGA MODE

Perhaps the TV can not recognize the resolution set 
by the PC. Suggest to change to the best resolution 
or other standard resolutions of Windows system.

SNOWY DOTS AND INTERFERENCE

If the antenna is located in the fringe area of a 
television signal where the signal is weak, the 
picture may be marred by dots. When the signal 
is extremely weak, it may be necessary to install 
a special antenna to improve the reception.
1. Adjust the position and orientation of the 
    indoor/outdoor antenna.
2. Check the connection of antenna.
3. Fine tune the channel.
4. Try another channel. Broadcasting failure may 
    happen.

IGNITION

Black spots or horizontal streaks appear, or the 
picture flutters or drifts. This is usually caused by 
interference from car ignition system, neon lamps, 
electric drills, or other electrical appliance.

GHOST

Ghosts are caused by the television signal 
following two paths. One is the direct path, the 
other is reflected from tall buildings, hills, or other 
objects. Changing the direction or position of the 
antenna may improve the reception.

RADIO FREQUENCY INTERFERENCE

This interference produces moving ripples or 
diagonal streaks, and in some case, loss of 
contrast in the picture. Find out and remove the 
radio interference source.

16

Summary of Contents for LD-3280



















Reviews: