INSTALLATION GUIDE | ROMAN SHADES
UPDATED APRIL 2022
3
INSIDE MOUNT
NOTE:
There are no brackets used for inside mount. Use the pre-drilled holes in the top of
the headrail as a guide for your screw placement.
1. Grab the headrail, and hold it up inside the top of the window. Set it back until the front
of the shade is flush with the wall, and make sure it’s centered. While holding the shade
material above the headrail, mark through each hole with your pencil.
2. Pre-drill holes at each mark with a 5/64” drill bit, then use the 2” installation screws to
mount the headrail directly to the top of the window.
MOUNTING THE SHADE
1.
1
2 3
The difficulty level of this installation is ranked at Level 2.
You got this!
If you have questions or get stuck, call our Customer Care Team at 888-257-1840, or email [email protected]
INSTALLATION GUIDE
ROMAN SHADES
LIFT SYSTEMS: CORDED LIFT | CORDED TOP DOWN BOTTOM UP
HARDWARE AND PARTS INCLUDED
* The quantity of brackets you receive will depend on the width of your roman shade.
BRACKET*
(CORDED LIFT)
CORD CLEAT
INSTALLATION SCREWS
(2”)
(1 1/4”)
(3/8”)
(3/4”)
OUTSIDE MOUNT
NOTE:
Depending on the size and weight of your shade, you may need an extra set of
hands to help you.
1. Place the brackets on top and back of the headrail, at least 3” - 4” from each end.
Wider shades may need 1 or 2 center brackets, which should be spaced evenly
between the outer brackets.
2. Use a pencil to mark each bracket screw hole on top of the rail, and then place the
brackets aside. Make an incision into the fabric at each mark so you can access
the wood underneath. Thicker fabrics may require a sharper utensil like a box-
cutter knife or fabric scissors; please use caution!
TOOLS REQUIRED
STEP LADDER
POWER DRILL
1/4” NUT DRIVER BIT
PHILLIPS DRILL BIT
5/64” DRILL BIT
TAPE MEASURE
PENCIL
LEVEL
PHILLIPS SCREWDRIVER
1
2
