4
Valance Installation
The type of valance attachment included in your package will vary depending
on the product you have ordered. Several products utilize the magnet system
which allows you to simply place the valance directly on to the headrail. No
clips are necessary.
To attach the valance clips to the front of the headrail, simply push down on the
clip to snap it into place. Install one bracket at each end of the headrail and
space others evenly. Do not place clips more than 48” apart.
Note: If the valance is outside mounted, attach the valance returns using the
provided “L” brackets. Simply slide the “L” bracket on to both slots in the back-
side of the valance and returns.
Tilt Wand Attachment
1. Attach wand to tip over the end of the tilter hook.
2. Slide the clear cover down to old the wand into place.
Optional Components
Spacer Blocks
Use spacer blocks or extension brackets to project the standard mounting
brackets out over obstructions (such as window moldings or ledges).
Align holes in back of bracket to holes in spacer block and secure to wall with
screws. Two spacer blocks per bracket may be used for additional projection.
Spacer Block with
Center Support
Spacer Block with
Mounting Bracket
