Cordless
Cellular
Fabric
Shade
Including
Top Down
/
Bottom-Up
&
Day / Night Shades
3
INSTALLATION INSTRUCTIONS
Step 1.
Check Package Contents
Missing part? Call 1-800-264-1190
Mounting hardware kit includes the following:
Part
Quantity
a. Mounting Brackets
2 (for 18” to 36” wide shades)
3 (for 36
1/8
” to 48” wide shades)
4 (for 48
1/8
” to 72” wide shades)
Shades ordered over 72” wide, will be (2) shades
joined by a Connector Device
. The above
bracket quantities apply for each shade.
b. 1
1/8
” Screws
2 per bracket
c. Hold Down Brackets
2 per shade
d.
3/8
” Screws
2 per bracket (for hold downs)
e. Handle for Bottom Rail 1
2 (for shades over 59” wide)
f. Handle for Middle Rail 1 (for TDBU and Day/Night Shades)
2 (for shades over 59” wide)
g. Head Rail Connector
1 for shades over 72” wide
[Note: one extra screw of each noted size is included for convenience]
Step 2.
Tools Required
Screwdriver, tape measure, pencil, drill, drill bits, step ladder.
Note: use #6 plastic anchors for dry wall or plaster mounting (not included).
Drill Bits: for screws, use a
3/32
" drill bit - for wall anchors, use
1/4
" drill bit.
Step 3.
Bracket Location and Installation
Your shade may be installed either inside the window frame or
outside the window frame.
A mounting bracket should be positioned about 1” to 6” from each
end of the head rail. For wider shades that require 3 or more brackets,
these should be spaced evenly between the two outermost brackets.
Always position the brackets such that there is no interference with
the cords and/or mechanisms inside the head rail. The procedure
outlined below will assure proper bracket placement.
Attaching the brackets:
The shape of head rails and mounting brackets varies by style of shade.
For style ‘A’ [see illustrations below]: Lift the head rail into position such
