Selecta 7001476, Instruction Manual, Page: 14 / 16

MANUAL DE INSTRUCCIONES CÓDIGO 80316 REV C 05/2020 Pag.: 14
J
.P. SELECTA s.a.u. Ctra. NII Km 585.1 Abrera 08630 (Barcelona) España Tel 34 937 700 877 Fax 34 937 702 362
e-mail: selecta@jpselecta.es - website: http://www.jpselecta.es
7.2 Programming
In this menu the program parameters are set.
Select the program to edit.
- Rotor key: Enter the rotor identification. This limits the programming
to avoid dangerous situations.
- Temperature key: To set the working temperature (only refrigera-
ted models)
- Save key: To save the data.
- Home key: To return to the main menu.
- Edit key: To edit “Phases”.
Press “Edit” to edit the “Phases”. Ther must be at least 2 phases:
1- Acceleration (slope)
Adjust the working speed and acceleration time to reach that speed
(slope).
Set the time that will be maintained at the programmed speed (rpm).
Up to 4 additional steps can be added, and up to the braking phase
(total 6 steps).
Adjust as in the acceleration phase, speed, time and acceleration time.
To add steps, press the + key.
2- Brake phase
The last phase of the program is always the braking phase. In this phase
it is only allowed to adjust the braking time (since the final speed will
be 0 rpm).
Press the “SEL” icon to select the current program as the active one.
Note: All programs are modifiable by the user.
Select the
program
Program
Add
phase
Delete
phase
Mark as
selected
acceleration ramp time braking ramp
Phase 1/2
rpm
Phase 2/2
“BREAKING”
braking