INSTRUCTION MANUAL CODE 80148 REV C
04/2020
Page: 10
J
.P. SELECTA s.a.u. Ctra. NII Km 585.1 Abrera 08630 (Barcelona) España
Tel 34 93 770 08 77 Fax 34 93 770 23 62 e-mail: [email protected] - website: www.jpselecta.es
TECHNICAL FEATURES
Voltage supply 115-230 V 50/60 Hz as indicated on the characteristics
plate.
EQUIPMENT DESCRIPTION
The magnetic digital stirrers described in this manual comprise one
model with stainless steel plate (ED) and another one with ceramic
plate (ED-C).
Stirrers
AGIMATIC ED
and
ED-C
are a group of stirrers with digital
technology for the control of the speed and temperature. This
technology allows setting parameters in a precise and repeatable way.
ED and ED-C models allow setting the heater plate temperature.
Including 1001610 probe as an accessory, it allows controlling liquid
temperature at same time that it is stirring.
ED-C model includes a ceramic heater plate that allows a better liquid
temperature control.
In some application it is important being in mind that heater plate
temperature and the liquid one are very different.
Power
550W
Maximum Temperature
350ºC
Temperature Resolution
1ºC
Heating Control
50 ... 350ºC
Electronic Control Plug
Yes
Speed
60 ... 1600 rpm
Stirring Power
10.000ml
Dimensions
14.5 x 19 x 26
Weight
3.2Kg
Temperature Limiter
370 ... 390ºC
Be sure that the voltage supplied is the same as the one indicated
on the characteristics plate.
Do not use the equipment if it is not earthed.
If you change the plug, bear in mind the following:
Yellow/green cable: Earth
* 50 ... 200ºC WITH THE EXTERNAL PROBE PT100
INSTALLATION
Place AGIMATIC on a flat, horizontal, level surface near mains.
