Operating Instructions
SPECIFICATIONS
DISPLAY
i
1 row of 6 digits to show electr cal parameters
7 segment LED display 71*24mm
e e
Digit integrated with param t r units
D
IN ICATIONS
e
n
EXP -
CT Rev rse Detectio
k
-
Kilo
M
-
Mega
WIRING INPUT
-
w
r
3 Ø 4 ire, 3 Ø - 3 wire, 2 Ø - 3 wi e and
r
1 Ø - 2 wi e system
T
RATED INPU VOLTAGE
C
11 to 300V AC (L-N) ; 19 to 519V A (L-L) ;
C
Installation ategory
III
E
R
FREQU NCY ANGE
45-65 Hz
A
N
R TED INPUT CURRE T
5
Nominal A AC (Min-50mA, Max-6A)
BURDEN
h
0.5 VA@5A per p ase
Y
CT PRIMAR
r
1A / 5A to 10,000A (Programmable fo any Value)
,
Note :
1A to 10 000A if CT secondary is 1 else
CT
primary is 5A to 10,000A
CT SECONDARY
1A or 5A (Programmable)
PT
PRIMARY
l
100V to 500kV (Programmab e for any value)
S
PT ECONDARY
l
100 to 500V AC (L-L) (Programmab e for any value)
POWER CONSUMPTION
Less than 8VA
O
ENVIRONMENTAL CONDITI NS
d
- In oor use
l
- A titude of up to 2000 meters
e
- Pollution d gree
II
t
Tempera ure :
:
Humidity
Up to 85% non-condensing
II
T
INS ALLATION CATEGORY
:
III
MOUNTING
: Panel mounting
WEIGHT
: 210gms
OUTPUT
Pulse
output :Voltage range external 24V DC max
Current capacity: 100mA
+
w
Pulse idth
:100ms 5ms
INT
:1000 pulses / kWh
C
Operating : -10
°
to 55
°
C
Storage
: -20
°
C to 75
°
C
PROTECTION CLASS :
EM306
r
MAINTENANCE
1. The equipment should be cleaned regularly to avoid
blockage of ventilating parts.
2. Clean the equipment with a clean dry or damp cloth.
Do not use any cleaning agent other than water.
OUTLINE
Dimensions (in mm)
PANEL CUTOUT
Dimensions (in mm)
9
0
.5
99
99
5
50
91.5
9
1
.5
FRONT PANEL DESCRIPTION
ONLINE PAGE DESCRIPTION
WIRING GUIDELINES
WARNING :
Active energy
Measurement
Accuracy
Class 1
ACCURACY
RESOLUTION
PT Ratio x CT Ratio
kWh
<15
<150
<1500
<15000
<150000
0.01K
0.01
0.1K
0.1
1K
1
0.01M
10
0.1M
100
1M
1000
150000
Pulse output
kWh/pulse
TERMINAL CONNECTIONS
N
S2
S1
S2
S1
S2
S1
V1
N
L
O
A
D
I
1
V2
V3
L1
L2
L3
I
2
I
3
PULSE
OUTPUT
CONNECTIONS DIAGRAM
L
N
+
SERIAL NUMBER DESCRIPTION
Press key for 10 sec. to display serial number.
CONFIGURATION
Note :
Setting should be done by professional after going
through this user manual and having understood the
application situation.
•
Use
key to shift the cursor for next digit
and
to
edit
.
Use
key to increment the configuration
value.
Use key to decrement the configuration.
• Use key for save parameter value & go to the next page
For the configuration setting mode :
•
Use
key
for
3 sec to enter and exit from
configuration menu.
Display will show only kWh page.
ORDER CODE INFORMATION
Product
Supply
Certification
Doc. Name: OP INST EM306 OP1029-V01(Page 1 of 3)
EM306
85 TO 276 V AC, 50/60 Hz
-
-
O
P
1
0
2
9
-V
0
1
1. To prevent the risk of electric shock, power supply to the
equipment must be kept OFF while doing the wiring
arrangement.
2. Wiring shall be done strictly according to the terminal
layout. Confirm that all connections are correct.
3. Use lugged terminals.
4. To reduce electromagnetic interference use of wires with
adequate ratings and twists of the same in equal size shall
be made with shortest connections.
5. Layout of connecting cables shall be away from
any
internal EMI source.
6. Cable used for connection to power source, must have a
2
2
0
cross section of 0.5mm to 2.5mm ( 20 to 14AWG ; 75 C
(minimum)). These wires shall have current carrying
capacity of 6A.
SAFETY PRECAUTIONS
All safety related codifications, symbols and
instructions that appear in this operating manual or on
the equipment must be strictly followed to ensure the
safety of the operating personnel as well as the
instrument.
If the equipment is not used in a manner specified by the
manufacturer it might impair the protection provided by the
equipment.
Do not use the equipment if there is any mechanical
damage.
Ensure that the equipment is supplied with correct
voltage.
1. Read complete instructions prior to installation and
operation of the unit.
2. Risk of electric shock.
3. The equipment in its installed state must not come in
close proximity to any heating sources, oils, steam,
caustic vapors or other unwanted process by products.
CAUTION :
1. This equipment, being built-in-type, normally becomes a
part of main control panel and in such case the terminals do
not remain accessible to the end user after installation
and internal wiring.
2. Conductors must not come in contact with the internal
circuitry of the equipment or else it may lead to a safety
hazard that may in turn endanger life or cause electrical
shock to the operator.
3. Circuit breaker or mains switch must be installed
between power source and supply terminals to facilitate
power 'ON' or ‘OFF’ function. However this switch or
breaker must be installed in a convenient position
normally accessible to the operator.
4.
5. The equipment shall not be installed in environmental
conditions other than those mentioned in this manual.
. The equipment does not have a built-in-type fuse.
Installation of external fuse of rating 275V AC /
Amp for
electrical circuitry
is highly recommended.
Before disconnecting the secondary of the external
current transformer from the equipment, make sure that
the current transformer is short circuited to avoid risk of
electrical shock and injury.
6
0.5
/ battery
INSTALLATION GUIDELINES
CAUTION :
For installing the meter
1. Prepare the panel cutout with proper dimensions
a
s
shown below.
2
. Push the meter into the panel cutout. Secure the
meter
in its place by fitting the clamp on the rear side. Fit
clamps on both sides in diagonally opposite location for
optimum fitting.
3. For proper sealing, tighten the screws evenly with
required torque.
Terminal screw tightening torque :
0.68 N-m to 0.79 N-m ( 6.018 In-Lb to 6.992 In-Lb )
Screw clamp tightening torque :
0.1N-m
(0.885 Lb-inch)
MECHANICAL INSTALLATION
7. Copper cable should be used.
(Stranded or Single core cable).
8. Before attempting work on device, ensure absence of
voltages using appropriate voltage detection device.
9. Recommended CT: Measuring type.
LISTED
