Selco Quasar 150, Instruction Manual

Page: 26 / 152

26
8 TECHNICAL SPECIFICATIONS
QUASAR 150
Power supply voltage U1 (50/60Hz) 1x230V±15%
Zmax (@PCC)
*
244m Ω
Slow blow line fuse 16A
Communication bus ANALOG
Maximum input power (kVA) 7.5kVA
Maximum input power (kW) 4.7kW
Power factor PF 0.63
Efficiency ( μ ) 83%
Cos ϕ 0.99
Max. input current I1max 33A
Effective current I1eff 18.1A
Duty factor (40°C)
(MMA)
(x=30%) 150A
(x=60%) 120A
(x=100%) 100A
(TIG)
(x=35%) 150A
(x=60%) 130A
(x=100%) 100A
Adjustment range I2 5-150A
Open circuit voltage Uo 78Vdc
IP Protection rating IP23S
Insulation class H
Dimensions (lxdxh) 280x110x220 mm
Weight 4.1 kg.
Manufacturing Standards EN 60974-1/EN 60974-10
Power supply cable 3x1.5 mm2
Length of power supply cable 2 m
*
This equipment complies with EN/IEC 61000-3-11 if the maximum permissible mains impedance at the interface point to the public grid
(point of common coupling, PCC) is smaller than or equal to the Zmax stated value. If it is connected to a public low voltage system, it is
the responsibility of the installer or user of the equipment to ensure, by consultation with the distribution network operator if necessary, that the
equipment may be connected.
*
This equipment does not comply with EN/IEC 61000-3-12. If it is connected to a public low voltage system, it is the responsibility of the
installer or user of the equipment to ensure, by consultation with the distribution network operator if necessary, that the equipment may be
connected. (Consult the “Electromagnetic fields & interferences” - " EMC equipment classification in accordance with EN/IEC 60974-10" section).