ENGLISH
USE AND MAINTENANCE MANUAL
This manual is an integral part of the unit or machine and must accompany it when it changes location or is resold.
The user must assume responsibility for maintaining this manual intact and legible at all times.
SELCO s.r.l.
reserves the right to modify this manual at any time without notice.
All rights of translation and total or partial reproduction by any means whatsoever (including photocopy, film, and microfilm) are reser-
ved and reproduction is prohibited without the express written consent of
SELCO s.r.l.
Edition ‘01
CONFORMITY CERTIFICATE CE
Company
SELCO s.r.l.
- Via Palladio, 19 - 35010 ONARA DI TOMBOLO (Padova) - ITALY
Tel. +39 049 9413111 - Fax +39 049 94313311 - E-mail: [email protected]
hereby declares that the apparatus type
GENESIS 282/GENESIS 352
GENESIS 282 TLE/GENESIS 352 TLE
to which this declaration pertains conforme to the :
73/23/CEE
89/336 CEE
92/31 CEE
93/68 CEE
and that the regulations have been duly applied :
EN 50199
EN 60974-1
Any operation or modification that has not been previously authorized by
SELCO s.r.l.
shall invalidate this certificate.
Onara di Tombolo (PADOVA)
Selco's legal representative
..................................
Lino Frasson
CONTENTS
13
1.0 SAFETY
. . . . . . . . . . . . . . . . . . . . . . . . . . . .14
1.1 Operator and other persons’ protection . . .14
1.2 Fire/explosion prevention . . . . . . . . . . . . .14
1.3 Protection against fumes and gases . . . . . .14
1.4 Positioning the power source . . . . . . . . . .14
1.5 lnstalling the apparatus . . . . . . . . . . . . . . .14
2.0 ELECTROMAGNETIC COMPATIBILITY (EMC)
15
2.1 Installation, use and area examination . . . .15
2.2 Emission reduction methods . . . . . . . . . . .15
3.0 RISK ANALYSIS
. . . . . . . . . . . . . . . . . . . . . .15
4.0 MACHINE DESCRIPTION
. . . . . . . . . . . . . . .16
4.1 Front control panel FP126 . . . . . . . . . . .16
4.2 Front control panel FP127 . . . . . . . . . . .17
4.3 Rear control panel . . . . . . . . . . . . . . . . . .17
4.4 ldentification . . . . . . . . . . . . . . . . . . . . . .18
4.5 Technical characteristics . . . . . . . . . . . . . .18
5.0 TRANSPORT - UNLOADING
. . . . . . . . . . . .18
6.0 INSTALLATION
. . . . . . . . . . . . . . . . . . . . . .18
6.1 Electric connection to the supply mains . . .18
6.2 Connecting the equipment components . .18
7.0 PROBLEMS - CAUSES
. . . . . . . . . . . . . . . . .20
7.1 Possible faults in the MMA welding . . . . . .20
7.2 Possible faults in the TIG welding . . . . . . .20
7.3 Possible electrical failures . . . . . . . . . . . .20
8.0 ROUTINE MAINTENANCE
. . . . . . . . . . . . . .20
9.0 GENERAL INFORMATION ON THE
DIFFERENT WELDING PROCESSES
. . . . . . . . . .21
9.1 Coated electrode welding (MMA) . . . . . .21
9.2 TIG welding (continuos arc) . . . . . . . . . .21
SYMBOLS
lmminent danger of serious bodily harm and
dangerous behaviours that may lead to serious
bodily harm.
lmportant advice to be followed in order to avoid
minor injuries or damage to property.
The notes preceded by this symbol are mainly
technical and facilitate operations.
