Selco Genesis 2700 TLH, Instruction Manual

Page: 35 / 256

35
3.10 Alarms screen
Allows the intervention of an alarm to be indicated and provides
the most important indications for the solution of any problem
encountered.
1 Alarm icon
2 Alarm code
3 Alarm type
Alarm codes
E01, E02, E03 Temperature alarm
E11, E19 System configuration alarm
E14, E15, E18 Program not valid alarm
E17 Communication alarm (µP-DSP)
E20 Memory fault alarm
E21 Data loss alarm
E27 Memory fault alarm ( )
E28 Memory fault alarm ( )
E38 Undervoltage alarm
E39, E40 System power supply alarm
E43 Coolant shortage alarm
E99 General alarm
3.11 Rear panel
1 Power supply cable
Connects the system to the mains.
2 Gas fitting
3 Signal cable (CAN-BUS) RC input
4 Off/On switch
Turns on the electric power to the welder.
It has two positions, "O" off, and "I" on.
3.12 Sockets panel
1 Negative power socket
For connection of earth cable in electrode welding or of
torch in TIG.
2 Positive power socket
For connection of electrode torch in MMA or earth
cable in TIG.
3 Signal cable (CAN-BUS) TORCH input
4 Gas fitting