11
Secure DP KVM Switch with Dedicated CAC Port, Preview Screen and 4K Ultra-HD Support
PREVIEW SELECTION
To switch display modes, press the desired preview mode button on the front control panel. The
active screens on the preview display will show the input number being displayed in each section.
Similar to the images below, the OSD will display a small number in the top right corner of each
window to indicate the active input computer being viewed for each viewing mode. The active preview
mode setting will be displayed on the device by lighting up the LED that corresponds with the selected
mode.
1
1
2
1
2
3
4
1
3
2
4
FULL SCREEN MODE
In the Full Screen mode, one of the four video sources is displayed in full
screen size at maximum resolution. Keyboard and mouse operations are not
affected. Pressing the Full screen mode preview button on the front panel of
the KVM will rotate the video input source/channel.
PIP MODE
PIP mode is fixed is size and position, the full screen displays one of the four
video sources, and a smaller image (thumbnail) containing another video
source on the right-hand margin of the screen allows for simultaneous
monitoring. Pressing the PIP screen mode preview button on the front panel
of the KVM will rotate the full screen and thumbnail video input sources/
channels.
QUADT MODE
In QuadT mode, the full screen displays one of the four video sources, and
is accompanied by three smaller images (thumbnails) containing the other
video sources on the right-hand margin of the screen, allowing simultaneous
monitoring. Pressing the QuadT screen mode preview button on the front
panel of the KVM will rotate the full screen and thumbnails preview locations
and sources.
QUADQ MODE
In QuadQ-mode, the screen is split into four fields of equal size with the four
selected video sources or computers being displayed in each of these fields.
the four computer are always in the same order. The user can not change the
position or the size of the window.
