Maintenance
Test Strip Holder
Note:
Do not use organic solvents, such as gasoline or paint thinner.
This will cause damage to the meter.
Meter Sensor Area
Remove the
Test Strip Holder
as described in the previous section. Wipe
down the
Meter Sensor Area
with a cotton swab. Do not to scratch the
transparent window covering the sensor.
Note:
Do not use bleach or alcohol to clean the
Meter Sensor Area.
This will cause damage to the meter.
33
Remove the
Test Strip Holder
by pressing in on middle of the
Test Strip Holder
and sliding it out from the meter. Wipe it with a damp cloth or a mild detergent
and dry it with a dry, soft cloth. Slide the
Test Strip Holder
back into the meter
by laying it flat on the meter. Firmly press down on the center of the
Test Strip
Holder
with your thumb and push it in until it clicks into place.
