Testing your blood glucose
Testing
①
With meter off or in setting mode and memory mode,
insert a test strip to enter into testing mode.
Note: If you do not start the test within three minutes, the
meter will turn off. To restart your meter, take out the
unused test strip and reinsert it into the meter.
Important
: The meter should only be used with BS-602
test strips. Using other test strips with this meter can
produce inaccurate results.
②
System check screen
The screen will briefly display all content to confirm
that the display is
working properly.
Note:
•
If appears, it indicates
the operating temperature
that
is
range. Place the system in
out of
room temperature
for half hour. Then test again.
•
If appears, it indicates that the battery is almost
empty. Replace the battery now.
③
The blood drop symbol flashes on the display screen.
Your meter is now ready to apply blood sample.
18
