3
7 .
Attach the pro-fit roll cage clamps to the
vehicle in the approximate location shown
.
8 .
Attach the windshield as shown. Before tightening the knobs, adjust
the position of the unfolded windshield in the roll cage so that the gaps
are the same on both sides and that there is enough gap at the tip for it
to fold easily. When you are happy with the position, tighten the knobs.
1 5 .
Rotate both levers perpendicular to the roll cage to lock
the windshield in place. To release the top section of the
windshield, rotate the lever 90º.
1 6 .
Push the top half of the windshield down and firmly press
the rubber plugs against each other to lock windshield in down
position
.
(Your vehicle may not be the same as the photo but
they work the same).
Lock
Unlock
