2
Repair and Maintenance
Replacing or Adjusting Mirror Glass
Tightening Mirror Housing Folding Feature
To tighten the folding feature of
the mirror, gently pry off the SZ
cap as shown and tighten nut.
If for any reason the Mirror Detent Insert ever becomes worn enough that
the mirror will not hold position well, please contact us for free
replacements. It can be replaced by first removing the nut shown in the
previous step. Next, remove the Mirror Housing, Spring, and Washer.
The Detent Insert can now be gently pried off and replaced. The detent is
designed so it can only go on one way.
Replacing Detent Insert
To replace or adjust Mirror Glass
pivot, gently pry off SEIZMIK cap
from the location shown.
1.
Tighten or loosen 8mm nut a little
at a time to adjust the mirror glass
ball joint tension, or remove it and
washers to replace Mirror Glass.
2.
Seizmik makes Windshields, Doors, Tops, Hood Racks, and other great accessories for utility vehicles & side x sides. Our products
are engineered tough for long life and tested under the harshest of conditions.
Seizmik products are designed, developed and manufactured by Vialink Corp. If you have any questions, comments, need
assistance, or are missing parts, please call 1-866-838-3366 between 9:00AM and 5:00PM EST. You can email us at
.
Pry here
Detent Insert
