Seitron AACE01, Use And Maintenance, Page: 13 / 20

13
6.0 OPERATION
In order to operate the entire system, proceed as follows:
1. Carry out the connections, as shown in chapter 5.0 CONNECTION DIAGRAMS.
2. Switch on the instrument.
3. In case the chosen diagram foresees the use of the external cooler:
- Power the cooler with the supplied cable.
Wait for the green LED on the front to stop flashing.
Once the green LED is still lit it means that the Cooler reached the operative temperature of 5°C, effectively
drying the gas.
The condensate water produced is collected inside a tank that is emptied with using a peristaltic pump.
After the gas has been dried, it passes through a particulate filter which eliminates the dust particles which
are present inside the dry gas; the particulate filter is interchangeable and must be replaced when it
changes its color from white (clean) to black (dirty).