6
TECHNICAL GUIDE
Cal. V182A
2) Insert the tip of a screwdriver into a gap between the solar cell
unit and holding ring for dial near a hooking portion, and then,
pry up the solar cell unit to release it from the hooking portion.
Follow the same procedure to release all the four hooked
portions of the solar cell unit.
Note:
When removing the dial and solar cell unit, take care
not to damage or deform them.
•
How to install
1) Set the notched portions of the solar cell unit to the guide posts
at the 4 o’clock and 10 o’clock sides of the holding ring for dial.
Note:
At this step it is not necessary to hook the solar cell unit
to the four hooking portions of the holding ring for
dial.
2) Set the notched portions of the dial to the guide posts at the 4
o’clock and 10 o’clock sides of the holding ring for dial.
3) Push the circumference of the dial near the hooking portion to
set the dial and the solar cell unit to the four hooking portions
as shown in the illustration at right.
Notes: • When installing the dial, take care not to damage or
deform it.
• After installing the solar cell unit and dial, check that
they are fixed securely to the holding ring for dial by
the four hooking portions.
Hooking portion
Solar cell unit
Hooking portion
Guide post
at the 10
o’clock side
Guide post
at the 4
o’clock side
Hooking portion
Hooking portion
Solar cell unit
Dial
Guide post
at the 10
o’clock side
Hooking portion
Guide post at
the 4 o’clock
side
11
Holding ring for dial
•
How to remove
The holding ring for dial is fixed by two hooking portions at the 12
o’clock and 6 o’clock sides.
1) Insert the tip of a screwdriver into a gap between the hooking
portion and main plate as shown in the illustration at right, and
then, turn the screwdriver in the direction of the arrow to
release the hooking portion from the main plate.
•
How to install
1) Set the hooking portions at the 12 o’clock and 6 o’clock sides
to the main plate.
2) Gently push the holding ring for dial at the hooking portions so
that they catch the main plate securely.
Dial
Hooking portion
Solar cell unit
Hooking portion
Main plate
Push
Holding ring for dial
Main plate