After the operation ③ pull the
crown to the second click.
4
Pulling
the crown
to the second
click
0 1
Push the crown back in
according to the time signal, etc.
5
The operation is completed.
The watch starts to work.
0
Pushing
the crown
back in
When the watch is used in an environment in which
a radio signal can be received again, receive a radio
signal to set the time.
→ Automatic reception and manual reception P.99
※ When the crown is
a screw lock type,
lock it. → P.95
Tr
o
u
b
le
s
h
o
o
tin
g
7
143
※ The hands do not move by turning the crown.
※ Advance the hand to set the time. The hand
cannot be turned reversely.
※ The date is changed at 0:00 a.m. (12:00 a.m.).
Pay attention to a.m. and p.m. to set the time.
※ The date cannot be set in this operation.
→ How to manually set the date P.144
Press the button to set the
time
3
Pressing
the button once
advances the
time by one
minute.
By pressing the button once, the second hand makes a full
rotation and the watch advances the time by one minute.
When the
button is kept
pressed for
two seconds,
the second
hand starts to
move. When
the button is
pressed again,
the second
hand stops.
Press the button and
then release it
※ When this condition is kept for one minute or more,
the watch automatically switches to the time
display mode. When the watch switches to the
time display mode, re-attempt operation from ① .
※ When the watch switches to the manual time
setting mode, the reception result data is lost.
Therefore, the reception result is indicated as N.
Press
the button
and then
release it
2
The second hand moves to the zero second position
and stops.
The watch switches to the manual time setting mode.
※ Press the button
with a pointed
object. → P.94
Tr
o
u
b
le
s
h
o
o
tin
g
7
142
※ When a no movement state of the second hand is
kept for one minute or more, the watch automatically
switches to the time display mode. When the watch
switches to the time display mode, re-attempt operation.
The second hand stops.
Pull the crown to the second
click and push it back in.
1
Pull the
crown to the
second click
and push it
back in.
0 1
※ When the crown is a screw
lock type, unlock it. → P.95
Continue to the next page
If the watch is continually used in an
environment in which a radio signal
cannot be received (a region other
than the radio signal reception
ranges, etc.), set the time manually.
→ Radio signal reception range
indication P.100
■ How to manually set the time
・ When the watch is used in an environment
in which a radio signal can be received
again, receive a radio signal to set the time.
→ Automatic reception and manual
reception P.99
※ Even if a radio signal cannot be received, the
watch can be used with the same accuracy as
that of a normal quartz watch. (Average gain/
loss ±15 seconds per month)
※ When a radio signal is received after the
time is manually set, the received time is
displayed.
When pulling the crown, do not stop at the first click but pull it
to the second click immediately. If the second hand does not
stop when pushing the crown back in, re-attempt operation ① .
Tr
o
u
b
le
s
h
o
o
tin
g
7
141
When a radio signal cannot be received
・Not receivable within the radio signal reception range
・When the watch is used outside the radio signal reception range
When a radio signal cannot be received, refer to the following pages:
Check that the time difference of the area where the watch is used is set.
Although the time difference is correctly selected, the time are misaligned.
→ At trouble: Reception of a radio signal P.148
Since a radio signal cannot be received, the time became misaligned. In this case,
set the time manually.
→ How to manually set the time P.141
Select the time difference of the area where the watch is used.
→ Setting the time difference (selecting a radio signal transmitting station) P.116
Although the time difference is correctly selected, the time are not correct. In this
case, set the time manually.
※ For the radio signal reception ranges, refer to Radio signal reception range indication P.100.
Tr
o
u
b
le
s
h
o
o
tin
g
7
140