Seiko S833, Instructions Manual

Page: 153 / 189

4) Changeover of unit of measure on display
・Temperature: Changeover between Celsius ("℃") and Fahrenheit ("℉") can be made in
the Barometer/Thermometer mode. See "How to change unit of measure of atmospheric
pressure/temperature" on P. 164.
・Wind speed: Changeover between meter/second ("m/s") and knot ("Kt") can be made in the
Altimeter mode. See "Altitude calibration, Drift Cancel and unit of measure setting" on P. 157.
※Amount of rainfall is indicated in millimeters ("mm") regardless of the unit of measure set in the
Altimeter mode.
※Unit of measure setting can also be made in the application. By pressing and holding Button Ⓕ to
perform Bluetooth communication, the settings made in the application take effect in the watch. Note
that those settings will not be transmitted to the watch through automatic synchronization.
[ Amount of rainfall/chance of rain ]
In the hourly forecast displays, amount of rainfall is displayed
numerically (mm) in the middle row, and graphically by
the dots on the dial's edge at 7 to 9 o'clock with a dot
indicating "1 mm." When amount of rainfall exceeds 10 ｍｍ,
all the 10 dots keep flashing.
In the daily forecast displays, chance of rain is displayed
numerically (%) in the middle row, and graphically by
the dots on the dial's edge at 7 to 9 o'clock with a dot
indicating "10%."
[ Humidity ]
In the hourly forecast displays, humidity is displayed numerically (%) in the
middle row, and graphically by the dots on the dial's edge at 7 to 9 o'clock. A
dot indicates "10%" by rounding off the unit digit of the value in the middle row.
Amount of rainfall Chance of rain
FIELD
MODES
4
153