3-32
Item
Description (" ": Initial Value)
Settings
Sets parameters about the watermark.
Image
Sets the type of the image used as the watermark.
* 1
·None
·NV Image
Keycode
Enters the keycode of the image used as the watermark.
* 2
·00 to 99
Position
Selects the alignment of the watermark.
* 2
·Top Left
·Top Center
·Top Right
·Left
·Center
·Right
·Bottom Left
·Bottom Center
·Bottom Right
Test Print
Sets parameters about the test print.
* 2
Info
Selects whether or not to include the setting content in the test print.
·ON
·OFF
Prints the watermark with the entered settings and data.
*1:
When you select other than "None", the IPD font cannot be used.
*2:
Not displayed when [Image] is set to "None".
3.6.5 Using Watermark
This section describes the procedure to use the watermark.
1. Register an image used for the watermark in "5.6 NV Image".
2. Select "NV Image" for [Image] in the [Watermark Settings] window of [Printing
Preferences].
3. Enter the keycode of the image used as the watermark in [Keycode].
4. Select the alignment of the watermark in [Position].
5. Click the [Apply] button.
