,
Ṽʙಅᎍಮဇᵍ
Instructions to the engineering outfit
ᴾ
ەቨ㠃ࡀᮌࡢሙྜ
Wooden wall
ࠕ ྲྀࡾࡅ✰ࡢᑍἲࠖࢆཧ↷ࡋ࡚ࠊୖ㒊㸰ࣨᡤᮌࢿࢪࢆࡡࡌ㎸ࡳࠊᮏయࢆࡅࡲࡍࠋḟỈᖹࢆ
☜ㄆࡋ࡚ୗ㒊ᮌࢿࢪࢆࡡࡌ㎸ࢇ࡛⥾ࡵࡅࡲࡍࠋ᭱ᚋୖ㒊㸰ࣨᡤࡢᮌࢿࢪࢆ⥾ࡵࡅࡲࡍࠋ
While referring to the mounting hole layout drawing in "
8.2
Mounting hole sizes
", tighten wood screws
into two upper mounting holes, and hook the Bell Timer on them. After making sure that the Bell Timer is
set level, provisionally tighten a wood screw into the bottom hole. Then, give a final tightening torque to
the upper two wood screws.
ەྲྀࡾࡅࢿࢪ㸦ᮌࢿࢪ㸧ࡢ⥾ࡵࡅ
Tightening-up of mounting screws (wood screws)
‒
ᜩԓ‒
WARNING
‒
ᙌԼ↝ӕ↹˄ↀ⇳⇞↞җЎ↚ዸ↰˄ↀ↕ⅾↄⅳ⅛ዸ↰˄ↀⅻɧҗЎ
↗ן↳ਰѣ↙↘↖ᙌԼⅻᓳɦↆ⅚ʴ៲ʙ↚ⅳ↺ↂ↗ⅻⅱ↹↭ↈ⅛‒
Be sure to tighten each wood screw into the anchor plug fully. If the
screws are not fastened securely, QBT-30 may come off from the wall as
the screws may loosen off under the influence of wind pressure or
vibrations, causing fatal accidents.
‒
ʙಅᎍಮồᵍ
For the engineering outfit
ᴾ
