Seiko OFL-12 SERIES, Instruction Manual

Page: 33 / 43

4 - 10
4.5 FINISHING (3RD POLISHING)
Step 1 Replace the polishing film for
polishing with the polishing film
for finishing (white label), then
set the weight position for
finishing.
Step 2 Pull the weight arm lever
toward you.
Step 3 Using the squeezable dropper
bottle, apply polishing fluid to
the entire surface of the
polishing film.
NOTE
Apply 2 ml or more polishing fluid
Step 4 Put the holding jig (after
completing the polishing step)
onto the polishing film with the
rotation stop pin in the notch in
the holding jig.
Step 5 Lift the weight arm lever up,
setting the thrust pin into the
hole in the center of the
holding jig.
Notch in holding jig
Rotation stop pin
Thrust pin
Notch in holding jig
Holding jig
Rotation stop pin
Weight arm lever
Weight