Seiko ASTRON Complete User Manual Download Page 39

Page: 39 / 58

ASTRON 8X53 GPS SOLAR

TO PRESERVE THE QUALITY OF YOUR WATCH

CONTENTS

How to use an adjustable three-fold clasp

Press the button on both sides of

the flap ; pull the buckle up.

The band will automatically come

out of the loop.

With pressing buttons on both sides

of the flap, pull the leather band

out of the moveable loop and fixed

loop. Then open the clasp.

Pull the pin out of a adjustment hole

of the band.

Slide the band to adjust its length

and find an appropriate hole. Place

the pin into the hole.

Place the tip of the band into the

moveable loop and fixed loop, and

fasten the clasp by pressing the

frame of the buckle.

Press the push buttons again to

unfasten the flap.

Fasten the flap.

Some bands are provided with an

adjustable three-fold clasp.

If the clasp of the watch you purchased is

as follows, please refer to the following

instructions.

●

How to wear or take off the watch

●

How to adjust the length of the leather band



The above illustrations are provided as examples.

Some details may differ depending on the model.

Push button

Flap

Buckle

Moveable loop

Fixed loop

Push button

Flap

Buckle

Moveable loop

Fixed loop

Adjustment hole

Summary of Contents for ASTRON



























































Search results

Summary of Contents for ASTRON

Reviews:

Related manuals for ASTRON

Brands by name

Popular brands

Seiko ASTRON, Complete User Manual

Search results

Summary of Contents for ASTRON

Reviews:

Related manuals for ASTRON

Brands by name

Popular brands