Seiko ASTRON Complete User Manual Download Page 22

Page: 22 / 58

ASTRON 8X53 GPS SOLAR

BASIC OPERATION (HOW TO SET THE TIME/HOW TO RECEIVE GPS SIGNALS, ETC.)

CONTENTS

Push the crown back in

Pull out the crown to the first click

The indicator hand indicates DST (Daylight Saving Time) setting.

Check the time zone and DST (Daylight Saving Time) settings

Display of the indicator hand

Displays ON/OFF setting of

DST (Daylight Saving Time).

DST

・

(OFF)

DST (ON)

Display



To change the time zone setting

• When you are in a place where GPS

signals can be easily received



How to adjust the time zone

P. 18

• When you are in a place where GPS

signals cannot be received



How to manually set the time

zone

P. 23



For the relationship between the stop

watch 1/5-second hand position and
time zone, refer to the “Time zone
display and list of time zones around
the world

P.12

”.

0 1 2

Pull out

to the

1st click

0 1 2

Push

back in

Press Button B

0 1 2

Press

Button B

The second hand moves to display the

currently set time zone of the sub-dial.
The indicator hand indicates the DST (Daylight

Saving Time) setting state of the sub-dial.
The day hand points to ∆.

The second hand returns to the time display

mode.
The indicator hand returns to the display of

charging status.



Also the current time zone of the main-dial and the DST (Daylight Saving Time) can be checked by just pressing and releasing Button B.

Summary of Contents for ASTRON



























































Search results

Summary of Contents for ASTRON

Reviews:

Related manuals for ASTRON

Brands by name

Popular brands

Seiko ASTRON, Complete User Manual

Search results

Summary of Contents for ASTRON

Reviews:

Related manuals for ASTRON

Brands by name

Popular brands