Press
Button A
10
After completing the operation, leave the watch untouched for 20 seconds.
The watch automatically exits the preliminary position setting mode, and the small seconds, hour and minute
hands start moving.
9
Press Button A to set the date to “1”.
Make sure that the numerical number “1” is located at
the center of the date window.
* If “1” is shown, go to step 10.
Continuous
adjustment
Keep pressing down the button for
longer than 2 seconds. Press the
button once again to stop.
Fine
adjustment
When the button is pressed
intermittently, the hand will slightly
advance.
EN
108
8
TROUBLESHOOTING
■ How to set the time zone
After the built-in IC is reset, the time zone is automatically set to LON (London).
* If necessary, set the time zone.
Press Button A for
3 seconds and
then release it.
11
Continue to press Button A (for 3
seconds), and when the stopwatch
second hand starts to move
counterclockwise, release it.
The watch switches to the time zone adjustment
mode and stops by the time zone set currently.
* When no operation is conducted for 10 seconds or
longer after the watch enters the mode to adjust the
preliminary position of the date, the watch
automatically displays the time again.
If this happens in the middle of the operation, re-
attempt the operation from procedure 11.
* If the stopwatch hands are not reset to the 0-position,
it is not possible to set the time zone (the stopwatch
second hand does not stop). Reset the stopwatch and
re-attempt procedure 1. → P.40
EN
109
8
TROUBLESHOOTING
Press Button B
to advance 1
time zone
Press Button A
to set back 1
time zone
12
Press Button A or Button B to set the
stopwatch second hand to the local time
zone of a desired area.
With each pressing of the button, the stopwatch
seconds hand moves to the adjacent time zone
index.
The position of stopwatch second hand indicates
the time zone. Please set it by referring to P.34.
EN
110
8
TROUBLESHOOTING
The radio signal transmitting station can be changed by selecting the time zone.
When selecting a time zone for regions other than the radio signal reception
ranges, the radio signal reception function will not work.
* When setting the daylight saving time (DST), add one hour to the time zone of the target area.
In Japan
In China
In the other countries
Set the seconds hand to
the 23-second position.
Set the seconds hand to
the 21-second position.
“Time zone display
and time difference
table” → P.34
13
Wait for ten seconds after the movement of the hour and minute hands stop.
(The time zone adjustment mode is finished.)
After ten seconds, the stopwatch second hand automatically switches to the 0-position.
EN
111
8
TROUBLESHOOTING
