manualshive.com logo in svg

Seiko 7T92, User Manual

Share
Download
Seiko 7T92 User Manual Download Page 9

19

18

English

English

HOW TO USE THE TELEMETER

Before beginning, check that the stopwatch has been reset.

START

(Flash of light)

STOP

(Crash of thunder)

Press button A to start the
stopwatch as soon as you
see the light.

When you hear the sound,
press button A to stop the
stopwatch.

Read the telemeter scale
that the stopwatch second
hand points to.

Approx. 3 km

Please note that the stopwatch second hand moves in 1 second increments and does not always
point exactly to the graduations of the telemeter scale. The telemeter scale can be used only
when the measured time is less than 60 seconds.

3

2

1

ROTATING BEZEL

The rotating bezel can show the elapsed time up to 60 minutes.  By setting it before
diving, you can know how many minutes you are underwater.

Start(10:10 AM)

“        ” 

mark

30 minutes have elapsed.

"30" on rotating bezel

1. Turn the rotating bezel to align its “        ” mark with the minute hand.
     * The rotating bezel rotates with clicks.  With each click, it turns half a minute.

2. To know the elapsed time, read the number on the rotating bezel that the minute

hand points to.

To prevent accidental rotation, the rotating bezel is so designed that rotation
becomes harder in water.  Also for safty's sake, it roatates only counterclockwise,
so that the time measured is never shorter than the actual elapsed time.

Minute hand

Example:

Bezel rotation may become slightly stiffer underwater.  This is not a malfunction.

Summary of Contents for 7T92














Reviews:

No comments

Brands by name

Popular brands

Load more brands