13
12
English
English
Accumulated elapsed time measurement
A
START
A
STOP
RESTART
A
STOP
RESET
B
A
○
○
○
○
* Restart and stop of the stopwatch can be repeated by pressing button A.
Standard measurement
A
A
B
START
STOP
RESET
After the stopwatch is restarted or split time is released, the stopwatch 1/20-second
hand moves for about 10 minutes and stops automatically.
In the same manner, if the stopwatch is stopped and restarted repeatedly or split time
is measured and released repeatedly, the stopwatch 1/20-second hand moves for
about 10 minutes and stops automatically.
Before using the stopwatch, be sure to check that the crown is set at the normal position and
that the stopwatch hands are reset to the “0” position.
* If the stopwatch hands do not return to the “0” position when the stopwatch is reset to “0”, follow the
procedure in “SETTING THE TIME AND ADJUSTING THE STOPWATCH HAND POSITION”.
STOPWATCH
The stopwatch can measure up to 12 hours in 1/20-second increments.
When the measurement reaches 12 hours, the stopwatch automatically stops counting.
A
B
STOPWATCH second hand
STOPWATCH minute hand
[ Ex.:
2 hours, 30 minutes and 10.85 seconds ]
Movement of the stopwatch 1/20-second hand
After the stopwatch is started, the stopwatch 1/20-second hand moves for about 10
minutes and automatically stops at the “0” position.
When the measurement is stopped or split time is measured, it moves to indicate the
elapsed 1/20 seconds.
STOPWATCH 1/20-second hand
STOPWATCH hour hand
