background image

■ Radio signal reception range: China (BPC)

The reception range from the transmitting station is approximately 1,500 km (1,500 km radius of the

transmitting station).

Shangqiu

National Time

Service Center

(68.5 kHz)

1,500 km

BPC is operated by NTSC.

Shangqiu National Time Service Center

Frequency: 68.5 kHz

 * NTSC: National Time Service Center

 * The watch may be able to receive radio signals outside

a reception range if the receiving conditions are

favorable.

 * Even within the reception range, weather conditions,

terrain, buildings, and orientation may mean that

reception is not possible.

“Environments in which it is difficult to receive a radio

signal” → P.24

EN

20

3

HOW TO SET THE TIME (RADIO SIGNAL RECEPTION)

■ Radio signal reception range: U.S.A. (WWVB)

The reception range from the transmitting station is approximately 1,500 km (1,500 km radius of the

transmitting station).

There are four time zones within the reception range.

Fort Collins

transmitting station

Frequency (60

 

KHz)

1,500 km

WWVB is operated by NIST.

Fort Collins transmitting station

Frequency: 60 kHz

 * NIST: National Institute of Standards and Technology

 * The watch may be able to receive radio signals outside

a reception range if the receiving conditions are

favorable.

 * Even within the reception range, weather conditions,

terrain, buildings, and orientation may mean that

reception is not possible.

“Environments in which it is difficult to receive a radio

signal” → P.24

 * Use of automatic reception is recommended, as this

time frame is optimal for automatic reception.

EN

21

3

HOW TO SET THE TIME (RADIO SIGNAL RECEPTION)

Radio signal reception range: Germany (DCF77), UK (MSF)

Each reception range from the transmitting station of DCF77 and MSF is approximately 1,000 km and 500 km

(1,000 km and 500 km radius of the each transmitting station). There are four time zones within the reception

range.

Mainflingen

transmitting station

(77.5 kHz)

Anthorn transmitting station

(60.0 kHz)

1,000 km

Approx. 500 km

DCF77 is operated by PTB.
Southeastern Frankfurt

Mainflingen transmitting station (77.5 kHz)

 * PTB: Physikalisch-Technische Bundesanstalt

MSF is operated by NPL.
Northern England

Anthorn transmitting station

Frequency: 60.0 kHz

 * NPL: National Physical Laboratory
 * Even within the reception range, weather conditions,

terrain, buildings, and orientation may mean that

reception is not possible.

“Environments in which it is difficult to receive a radio

signal” → P.24

 * Use of automatic reception is recommended, as this

time frame is optimal for automatic reception.

EN

22

3

HOW TO SET THE TIME (RADIO SIGNAL RECEPTION)

■ To improve radio signal reception

● Place the watch in a place where it can easily receive a radio signal

such as near a window.

The antenna is embedded at the 9 o’clock position of the watch.

Turning the antenna toward the outside of a window or the

direction facing transmitting stations helps improve radio signal

reception.

 * Locations of transmitting stations

“Radio signal reception range indication” → P.18

● Do not move the watch while it is

receiving radio signals.

To enhance the reception of radio signals, do not move the

watch or do not change the orientation of the watch while it is

receiving radio signals.

 * If the button or crown is operated while the watch is receiving a

radio signal, the reception will be cancelled.

● The place where the watch is put before going to bed

Place the watch next to a window facing in the direction of a transmitting station before bedtime because

automatic reception is performed late at night.

The standard radio signal is influenced by the distance from the transmitting station, as well as by terrain

(including buildings) and weather conditions.

Also, please search for a place to easily receive radio signals when attempting reception.

Antenna

EN

23

3

HOW TO SET THE TIME (RADIO SIGNAL RECEPTION)

Summary of Contents for 7B72






















Reviews: