background image

About energy

■ Energy depletion forewarning function (Two-second

interval movement and Five-second interval movement)

The energy depletion forewarning function is activated when the energy stored in the watch runs low.

In such a case, the seconds hand moves at two-second intervals.

If the watch continues to be in the state of two-second interval movement, the watch switches to five-second

interval movement, followed by a completely stopped state.

If the energy depletion forewarning function is activated, charge the watch sufficiently.

“How to charge the battery” → P.34

“Guide to charging times” → P.35

 * Neither the button nor the crown can be operated while the seconds hand moves at two-second or five-second

intervals. (This is not a malfunction.)

 * While the seconds hand moves at five-second intervals, the hour and minute hands, as well as the date, stop

operating.

 * While the seconds hand moves at five-second intervals, the automatic reception function and manual reception

function will not work. After the watch is charged sufficiently and the seconds hand returns to normal one-second

interval movement, conduct the manual reception of radio signals to set the watch to the correct time. (“Automatic

reception and manual reception” → P.17)

EN

36

5

SOLAR CHARGING FUNCTION

■ Power save function

This watch is equipped with a power save function which can suppress energy consumption when it is left without receiving

an adequate light source for a certain length of time.

 * There are two types of power save mode.

 

Power Save 1

Power Save 2

Condition The watch is exposed to a state without receiving an

adequate light source for 72 hours or longer.

The watch is in an insufficient charging state for a long

time.

Situation

The seconds hand

stops pointing at the

15-second position,

and the hour and

minute hands, and

date also stop.

The watch conducts

automatic radio signal

receiving.

The seconds hand

stops pointing at the

45-second position,

and the hour and

minute hands, and

date also stop.

The watch does not

conduct automatic

radio signal receiving.

 * The date shows “1”.

How to

handle the

situation

When the watch is exposed to an adequate light source

for 5 seconds or longer, or the button is pressed, it

displays the current time again after the seconds hand

is rapidly advanced.

After sufficiently charging the battery, set the watch for

the current time, if necessary.

Power Save 2

 * While the watch is being charged, the seconds hand moves at “Five-second Intervals.” During the “Five-second Interval Movement,”

neither the button nor the crown can be operated.

 * If the “Power Save 2” mode is prolonged, the stored power amount drops and the internal current time information stored will be lost.

When the watch returns to its normal movement of one-second interval after sufficiently charging the battery, set the current time by

receiving a radio signal. (“Automatic reception and manual reception” 

→ 

P.17)

EN

37

5

SOLAR CHARGING FUNCTION

Daily care

The watch requires good daily care

• Do not wash the watch when its crown is in the extended position.

• Wipe away moisture, sweat or dirt with a soft cloth.

• After soaking the watch in seawater, be sure to wash the watch in clean pure water and wipe it dry

carefully.

Do not pour running water directly from a faucet onto the watch. Put some water into a bowl first, and

then soak the watch in the water to wash it.

 * If your watch is rated as “Non-water resistant” or “water resistant for daily use,” please do not wash the watch.

“Performance and type” → P.39

“Water resistant performance” → P.43

Turn the crown from time to time

• In order to prevent corrosion of the crown, turn the crown from time to time.

• The same practice should be applied to a screw down crown.

“Crown” → P.13

Press the button once in a while

• Press the button once in a while to prevent corrosion of the button.

 * If the display is changed by pressing any button, wait and leave it as is.

EN

38

6

TO PRESERVE THE QUALITY OF YOUR

WATCH

Performance and type

The case back shows the caliber and performance of your watch

7B72-0AA0

7B

72

-0A

A0

000000

M

AD

IN

 JA

PA

N

WATER

 RES

IST

AN

T

 

10

BA

R

STA

INL

ES

ST

EE

L

Water resistant

performance

Case Number

Magnetic resistant

performance

Water resistant performance

Please refer to P.43.

Case Number

The number to identify the type of your watch.

Magnetic resistant performance

Please refer to P.44 and P.45.

 * The above illustration is provided as an example, therefore it may not be exactly the same as your watch.

EN

39

6

TO PRESERVE THE QUALITY OF YOUR

WATCH

Summary of Contents for 7B72






















Reviews: