Seiko 6R15, Instructions Manual

Page: 20 / 23

77
Notes on skin
irritation and allergy
Skin irritation caused by a band has various reasons such as
allergy to metals or leathers, or skin reactions against friction on
dust or the band itself.
Notes on the
length of the band
Adjust the band to allow a little clearance with your wrist to
ensure proper airflow. When wearing the watch, leave enough
room to insert a finger between the band and your wrist.
・Polyurethane band
・ Do not expose the watch to direct sunlight for a long time.
・ Please take care when wearing a watch with light-colored band, as dirt is likely to show up.
・ Refrain from wearing a leather band watch other than Aqua Free bands while bathing, swimming, and when
working with water even if the watch itself is water-resistant enforced for daily use （10-BAR water resistant）.
・ A polyurethane band is susceptible to discoloration from light, and may be deteriorated by solvent or
atmospheric humidity.
・ Especially a translucent, white, or pale colored band easily adsorbs other colors, resulting in color smears or
discoloration.
・ Wash out dirt in water and clean it off with a dry cloth.
（Protect the watch body from water splashes by wrapping it up in plastic wrap etc.）
・ When the band becomes less flexible or cracked, replace the band with a new one.
Band
(maintenance procedure)
・Metallic band
・Leather band
・ Moisture, sweat or soil will cause rust even on a stainless steel band if they are left for a long time.
・ Lack of care may cause a yellowish or gold stain on the lower sleeve edge of shirts.
・ Wipe off moisture, sweat or soil with a soft cloth as soon as possible
・ To clean the soil around the joint gaps of the band, wipe it out in water and then brush it off with a
soft toothbrush.
（Protect the watch body from water splashes by wrapping it up in plastic wrap etc.）
・ Because some titan bracelets use pins made of stainless steel, which has outstanding strength,
rust may form in the stainless steel parts.
・ If rust advances, pins may poke out or drop out, and the watch case may fall off the bracelet, or the
clasp may not open.
・ If a pin is poking out, personal injury may result. In such a case, refrain from using the watch and request repair.
・ A leather band is susceptible to discoloration and deterioration from moisture, sweat and direct sunlight.
・ Wipe off moisture and sweat as soon as possible by gently blotting them up with a dry cloth.
The band touches the skin directly and becomes dirty with sweat or dust. Therefore,
lack of care may accelerate deterioration of the band or cause skin irritation or stain
on the sleeve edge. The watch requires a lot of attention for long usage.
76
75
Examples of common magnetic products that may aff ect watches
Cellular phone
(speaker)
Bag
(with magnet buckle)
AC-powered
shaver
Portable radio
(speaker)
Magnetic
cooking device
Magnetic
health pillow
Magnetic
necklace
AC adapter
Magnetic resistance
（affect of magnetic field）
74
Aff ected by nearby magnetism,
a watch may temporarily gain or lose time or stop operating.
If the watch becomes magnetized and its accuracy deteriorates to an extent exceeding the specifi ed
rate under normal use, the watch needs to be demagnetized. In this case, you will be charged for
demagnetization and accuracy readjustment even if it happens within the guarantee period.
The reason why watch is aff ected by magnetism
The built-in balance spring may be infl uenced by a strong external magnetic fi eld.
Indication on the case back Condition of use
No indication
Keep the watch more than 5 cm away from
magnetic products. (JIS level-1 standard)
Keep the watch more than 1 cm away from
magnetic products. (JIS level-2 standard)