REMARKS ON REPAIRING CAL. 5T82A
/26
After installing the battery, reset the built-in integrated circuit, and then
set the time and adjust
the ALARM and WORLD TIME hand positions
following the procedure below.
II. NECESSARY PROCEDURE AFTER BATTERY CHANGE
Pull out to the 2nd click when the small second hand is at the
12 o’ clock position.
Turn to set the main time.
* Check that AM/PM is correctly set.
Pull out the crown to the 2nd click.
Press and hold both buttons A and B at the same time for longer than 2 seconds.
Push back in to the normal position in accordance with a time signal.
Press Button B to set the ALARM hands to the current time.
Press Button B to set the city hand to point to the city of
which you know the current time.
Press Button A for longer than 2 seconds.
The WORLD TIME hand turns a full circle.
Press Button B to set the WORLD TIME hands to the time
of the city you have selected by the city hand.
Press Button A for longer than 2 seconds.
The city hand turns a full circle.
Button B
Crown
Crown
Systen Reset
Crown
Note*
Note*
Pressing Button A for longer than 2 seconds here will allow you to resume the procedure again
as indicated by the arrow if neccessary.
Button A
Button B
Button A
Button B
