Cal. 5T82A TEC HNICA L GU IDE
14/26
No.
PROCESS
ILLUSTRATIONS AND SPECIAL INSTRUCTIONS ETC.
22
Set the train wheel
bridge.
21
Set the pin for train
wheel bridge.
20
Set the battery
connection (-)
Lubricate the upper
pivots of the rotor for
city setting, WORLD
TIME rotor, and
ALARM rotor and
step rotor.
19
Set the buzzer lead
terminal.
1
Lubricate the upper
pivots of the minute
wheel, center minute
wheel for ALARM,
city setting wheel,
center minute wheel
for WORLD TIME
and small second
wheel.
<22> Set the train wheel bridge.
Minute wheel
*1
The upper pivot of the
minute wheel for WORLD TIME should be additionally lubricated.
5 points to be lubricated as illustrated above.
Other portions
Upper pivot of the rotor
Lubricate the upper pivots of the minute wheel, center minute wheel for ALARM, city setting wheel, minute wheel
for WORLD TIME and small second wheel: Moebius F or AO-2.
<21> Set the pin for train wheel bridge.
Turn the pin 90-degree clockwise to
fix it using a screwdriver.
Make sure that the pin is put in the
correct direction.
Never turn the pin more than 90
degrees.
Lubricate the upper pivots of the rotor for city setting, WORLD TIME rotor, and ALARM rotor and
step rotor
Moebius F or AO-2
Lubricate the upper pivot of each rotor (at four points) illustrated below.
<19> Set the buzzer lead terminal.
<20> Set the battery connection (-).
