Seiki SC5SHM, Instruction Manual

Page: 8 / 12

8
ELECTRICAL SAFETY AND POWER CORD HANDLING
• Before connecting the hand mixer to the power supply, make sure your
outlet voltage and circuit frequency correspond to the voltage indicated on
the appliance rating label and your outlet socket is properly earthed. If this is
not the case, do not use the hand mixer.
• Do not use any other appliance at the same time on the same electrical circuit
as it may overload the circuit and blow the fuse or breaker.
• To protect against fire and electric shock, do not immerse the cord, plug, power
base or the hand mixer itself in water or other liquid. Do not expose the
electrical connections to water.
• Avoid spillage on the connector.
• Do not kink, bend, squash, strain or damage the power cord and protect it
from sharp edges and heat. Do not let the cord hang over the edge of
a table or benchtop. The cord should be run in such a way that there will be no
risk of anyone pulling it inadvertently.
• Do not use an extension cord with this hand mixer.
• Do not pick up or operate the appliance if the power supply cord, plug,
hand mixer housing is damaged, or after it malfunctions or has been
damaged in any manner.
• A damaged cord or plug must be replaced by the manufacturer or a qualified
person in order to avoid a hazard. In case of damage, contact our after
sales support centre for advice.
• Switch off the appliance and disconnect from supply before changing
accessories or approaching parts that move in use.
This appliance is intended to be used in household and similar applications
such as:
- staff kitchen areas in shops, offices and other working environments
- farm houses
- by clients in hotels, motels and other residential type environments
- bed and breakfast type environments
The appliance must not be immersed.
GENERAL SAFET (Cont.)