Seiki SC-5100AU6A, Installation Manual

Page: 12 / 20

12
INSTALLATION OF OUTDOOR UNIT (Cont.)
CONNECTION OF POWER CABLE
1. Remove the connection panel of the outdoor unit.
2.
Non-quick Coupler: Connect the indoor power
and control wires with the matching outdoor wires
in accordance with the electric schematic diagram
on each unit, making sure that the connection
is secure.
Quick Coupler: Directly connect the quick cable
couplers with indoor and outdoor quick cable
couplers after the disassebly of the outdoor unit.
3. Use a press plate to fix the wires firmly into
place, then reinstall the connection panel.
4. Option steps: If present in the unit, you should
connect the indoor wire connector with the outdoor
probe wire connector for defrosting.
WARNING
• Do not connect the wires the wrong way around, otherwise malfunction or damaging the
unit can occur.
• The appliance shall be installed in accordance with national wiring regulations.
• If the supply cord is damaged, it must be replaced by the manufacturer or a qualified
service agent in order to avoid hazard.