3
THE REAR PANEL
8 .MIC input
This is a jack for inputting MIC signal.
9
.Input m
ode
There are totally four input modes here. They are 1-MIXER/CD PLAYER,
2-CASSETTE PLAYER, 3-RADIO TUNER, 4-AUX INPUT respectively.
10
.DC input socket
It is used to connect an attached adapter.
11 .
Antenna
This antenna transmits signal for receiver. To get effective transmission, never
cover the antenna with hand, clothes, etc during the operation, and always
position the transmitter nearby the receiver.
3.2 UEM-8DR
1 Stereo socket
This is a 3.5 jack for listening stereo signal or mono signal.
2 Volume control
It controls the volume of receiver.
8
10
9
11
This key is used to save the exact function you select.
7. MEM key
Via this key, you can choose the right function you want.
6. SET key
receives stereo signal. When the power switch is set in the position ON which the
silkscreen shows, it receives mono signal.
When the power switch is set in the middle, the receiver is switched on and it
3 Power switch
When power switch is set in the position OFF, the receiver is switched off.
4
4. OPERATION
4.1 Make the right connection for the system
4.1.1. Please make sure first the voltage is correct, and then plug the power
supply cord into DC INPUT jack.
4.1.2. Install the antenna for UEM-8T.
4.2 UEM-8T TRANSMITTER
4.2.1 Turning on/off RF signal
Press SET key once and use UP and DOWN key to switch ON/OFF RF signal. If "ON"
remains flashing, it means the RF signal is turned on. If "OFF" remains flashing, it
means the RF signal is turned off. Then press MEM key to save it.
4.2.2 Selecting channel
Press SET key twice, and "channel" keeps flashing. It means the unit is in the
When LED lights up red, it means battery power is insufficient. When the LED lights
up green, it means the receiver is in normal operation.
It is the detachable belt clip for easy carry during the live applications.
4 LED indicator
5 Battery cover
6 Channel selector control
It is used to select the channels 1~16 for the receiver.
7
Label
8 Belt clip
6
5
7
8
1
2
3
4
