INTRODUCTION
3
14
Thank you choosing for purchasing 12 Channel powered Mixer . This is a professional
compact mixer to give you great quality and better reliability than ever before You will get
the smooth, accurate more natural and open sound from this apparatus. and it is really ideal
for gigs, recording and fixed PA installations.
The 12 Channel powered Mixer is packed with features that can not be found in other
consoles of its size: 4mono (provided with ultra low noise microphone pre amplifiers and
Phantom Power at +48 Volt ) and 4 stereo input channels and each of them is provided with
a 3-band equalizer for HI, MID and LOW controls, as well as 2 auxiliary control; highly
accurate 12-segment bar graph meters and 2-track inputs assignable to main mix, control
room/phones Outputs etc..
This unit is very easy to operate but we advise you to go through each section of this manual
carefully. In this way you will get the best out of your 12 Channel powered Mixer.
FEATURES
Ultra-low noise discrete MIC Preamps with +48V Phantom Power.
4 MIC Input Channels with XLRs a n d b a l a n c e d L i n e I n p u t s a n d I n s e r t I / O a n d
Compressors control
Low Cut for each MIC Input
2 Stereo Input Channels with mono XLRs Input and TRS Jacks; 2 Stereo Input Channels
with RCA Jacks and TRS Jacks.
3-band EQ and Peak LEDs on each MIC channels. 2-band EQ and Peak LEDs on Stereo
channels.
1 AUX Sends POST/PRE per channel for monitoring or external effects.1 DFX(AUX) Sends
POST Fader for internal effects or monitoring.
Mute and PFL function for each channels, 60mm Fader for level control.
GR1/2 and Main L/R bus assign for each channel
2-Track Input assignable to Main Mix or Control Room / Headphone Outputs.
Balanced XLR & TRS outputs for Main Mix
Built in 24-bit DSP effect with 100 presets.
Option MP3 player or Bluetooth player.
Built in high-powered CLASS-D amplifier module , Rated power:
2 x 500W@ 4
or 2 x 300W@ 8
.
2 x 650W@ 4
or 2 x 350W@ 8
Ù
Ù
Ù
Ù
(at 1KHz RMS peak power,THD<1%)
(ref. EIAJ)
12 CHANNEL
POWERED MIXER
In pause state, press this key, it will go to
next track and keep in pause state. In play
state, press this key, it will go to the next
track and start playing.
Press this key, the player will change between the following four modes:
REP ALL means to repeat all tracks in the memory, mark on the screen is
REP1 means to repeat one track, the mark on the screen is
Play in order means to play the tracks according to the order, the mark on the screen is blank.
Random play means to play the tracks at random, the mark on the screen is A.
All the USB player information are monitored through this sexy & magic display.
an be paired with mobile phones, tablets or PC Bluetooth adapter to play stereo audio with
two LED status indicator.
These two LEDs use to display different working state:
1). For the first time that module power on,it is on stand by state, and the right LED flashes
twice about 2 seconds once.
2). Matching state, two LED's alternately flash quickly.
3). After connected the device, the right LED lighted on constantly.
Press this key, it will go to the previous track and start playing.
Press this key, it will go to the next track and start playing.
c-
NEXT
d-
RPT
-
g
Bluetooth Version 2.1
C
a-Display
b-
PRE
c-
NEXT
e-
PLAY/PAUSE
f REC
- POWER(Push & Hold)
Option Four -
In play state, press
PLAY / PAUSE key to pause the player. In pause state, press
PLAY /
PAUSEkey to start playing.
In power on state, press this key, it will go to the recording preparation state. Press REC again
to start recording. Any other operations are not available in recording state until press POWER
to stop recording;
When the unit is off, press this key and hold for about 2 or 3 seconds to turn on the power
supply of player. Repeat the above operation, you can turn off the power supply of the player.
h
- DISPLAY:
USB PLAYER
SMP-R
(Push & Hold)
POWER
REC
(e) ( f )
(a)
(h)
(c) (d)
(b)
(g)
