8
This control is used to adjust the signal
present at the Phones / control room
output, which can be varied from -
to
+15 dB.
This stereo 12 segments LED meter
will be indicate the level of overall
output signal (Note: when the output
level reach to 10dB, the amp output will
be the max).
These control is used to determine the
internal DSP module levels and DFX
sends output, which can be varied from
-
to +15 dB.
This control is used to determine the
master AUX SEND levels, which can be
varied from -
to +15 dB.
This control assign the ST RETURN
signals to their respective AUX SEND
outputs. Which can be varied from -
to +15 dB.
This control assign the ST RETURN
signals to their respective MAIN MIX
outputs. Which can be varied from -
to +15 dB.
This control is used to assign the signal from FX to AUX SEND output.
Adjust this knob to select the right effect you wish to perform. There are totally 100 options
for you: Echo, Vocal, Plate and versatile two-effect combination. When you are satisfied the
right preset, please push this knob to store this preset you want.
24. PHONES/CONTROL ROOM
25. OUTPUT LEVEL
26. DFX (AUX2)
27. AUX SENDS (AUX1 SENDS)
28. ST RETURNS TO AUX
29. ST RETURNS TO MAIN
30. FX TO AUX
31. PROGRAM(PUSH)
CLIP
AMP
18
19
20
26
25
28
31
32
29
34
MUTE
PFL
PEAK
GR 1-2
MAIN
MIX
DFX
TO MAIN
TO AUX
AUX
SENDS
DFX
MAIN
G
1-2
R
OUTPUT LEVEL
10
4
0
7
10
20
30
L
R
7
2
4
2
48V
PWR
DIGITAL
EFFECTS
PROGRAM (PUSH)
FX TO
AUX
00 09 Echo
10 19 Echo Verb
20 29 Tremolo
30 39 Plate
40 49 Chorus
50 59 Vocal
60 69 Rotary
70 79 Small Room
80 89 Flange Verb
90 99 Large Hall
L R
15
0
15
0
15
0
15
0
15
0
15
10
dB
5
0
5
10
20
30
40
60
15
10
dB
5
0
5
10
20
30
40
60
15
10
dB
5
0
5
10
20
30
40
60
15
0
15
0
CTRL./PHONES
2TK IN/MP3
TO MAIN
TO CTRL.
ST RETURNS
88
21
23
22
24
27
30
33
9
It displays the selected preset.
This LED indicates when the phantom power is switched on.
This LED indicates when the power is on in your mixer.
Use the Tape input if you wish to listen to your Mix from a Taper Recorder or DAT. You can
assign the signal coming from the Tape Recorder either to a pair of studio monitor using the
control room assignment on the front panel or you can also send the signal directly to the
Main Mix.
These RCA jacks will route the main mix into a tape recorder.
The stereo output is supplied both XLR and 1/4" TRS sockets, which are used to send the
audio to an amplifier. Through the main mix level control, you can adjust the output level from
-
to +10dB.
Use these stereo 1/4" sockets to return the sound of an effect unit to the main mix. You can
also use them as extra auxiliary inputs, but they are primarily used to connect the output of
external effect processors.
These 1/4" phone sockets will be used to send the signal to studio monitor speakers or to a
second set of PA.
This socket is used to connect external foot switch for your convenient operation, it has the
same function as DFX MUTE button.
These 1/4" phone sockets are used to send out the signal from the AUX bus to external devices
such as effects.
32. DIGITAL EFFECTS
33. PHANTOM LED
34. PWR LED
35. 2TK IN / OUT
TAPE IN
TAPE OUT
36. MAIN MIX OUTPUT
37. ST RETURNS
38. CTRL-ROOM
39. FOOT SWITCH
40. AUX SENDS
12 CHANNEL
POWERED MIXER
