29. FOOT SWITCH (only for 8 channels with digital effect)
30. ST RETURNS
31. CONTROL ROOM OUTPUT
32. DFX(AUX) SENDS
33. MAIN MIX OUTPUT
34. PHONES
This socket is used to connect external foots witch for your convenient operation, it has the
same function as DFX MUTE button.
Use these stereo 1 / 4" sockets to return the sound of an effect unit to the main mix. You can
also use them as extra auxiliary inputs, but they are primarily used to connect the output of
external effect processors.
These 1 / 4" phone sockets will be used to send the signal to studio monitor speakers or to
a second set of PA.
This jack is used to output the channels signal that comes from DFX (AUX)buses.
The stereo output is supplied 1/4" TRS sockets, which are used to send the audio to an amplifier.
Through the main mix level control, you can adjust the output level from -
to 10dB.
This socket will be used to send out the mix signal to a pair of headphones.
35.
Opening the cover and connect the module with MIXER CN4. the module include SMP-R
SMP-S
SMP-T
Bluetooth-2.1.
The program for module playback can be assigned to Main Mix by 2TK routing. When using
SMP-R recording function, the CN9 need to be connected which the signal come from the
Main Mix. After above finished then you can using following module function:
OPTIONAL MODULES SECTION
This section can be selected and installed according to user's requirement.
8/10 CHANNEL
MIXING CONSOLE
11
14
a- USB PORT
b-
PRE
c-
NEXT
d-
RPT
For connecting with USB memory.
In pause state, press this key, it will
go to previous track and keep in pause state. In play state, press this key, it will go to the previous
track & start playing.
In pause state, press this key, it will go to next track and keep in pause state. In play state, press
this key, it will go to the next track and start playing.
Press this key, the player will change between the following four modes:
REP ALL means to repeat all tracks in the memory, mark on the screen is
REP1 means to repeat one track, the mark on the screen is
Play in order means to play the tracks according to the order, the mark on the screen is blank.
Random play means to play the tracks at random, the mark on the screen is A.
USB PLAYER
SMP-T
(Push & Hold)
POWER
(e) ( f )
(a)
(h)
(c) (d)
(b)
(g)
Option Two - SMP-T
The file system of USB memory for USB players is FAT16 and FAT32, and these players can
only decode MP3. It has 7 rank subordinate folders at most.
e
PLAY / PAUSE key
)-Folder List:
See the Fig 3, the display shows MP3 files folders names. Use
PRE/
NEXT key to
scan, press
, you'll enter into corresponding folder. In order to
return to Fig5 interface, you just need to press the
STOP key.
In play state, press
PLAY / PAUSE key to pause the player. In pause state, press
PLAY /
PAUSEkey to start playing.
e-
PLAY/PAUSE
f-
STOP
In play state, press this key to stop playing and all the songs in USB memory will appear on the
display; In stop state, press
STOP /
PRE/
NEXT keys again to go to first song and the
player will keep in pause state, then press
PLAY/PAUSE key to play the song.
CN4
CN9
35
