G E T T I N G T O K N O W Y O U R M U L T I - F U N C T I O N M O U N T K I T
3
Components
1. DC output Jack (5V, 0.8Amp)
2. Holding Arm
3. Volume Control Knob
4. Power LED
5. Hands Free Port
6. PDA Charging Port (5V, 1.2Amp)
7. Holding Arm Release Button
8. 3.5mm Stereo Phone Port
9. Built-in Speaker
10. Mounting Slot
11. Stereo Cable
12. PDA Charging Cable
M O U N T T H E C R A D L E I N Y O U R C A R
4
How to mount the Cradle in your car?
Step 1:
Check to make sure you have all the parts of the Mount Kit.
Step 2:
Connect the cradle to the multi-angle pedestal by inserting the plate of the pedestal into the slot on the
back of the mount. You must insert it until you hear a “click”.
Step 3:
Find a flat surface (3.75” x 2.25”) where you want to mount the cradle and clean the surface.
Step 4:
Peel off the film on the 3M tape, stick it on the surface firmly. Apply as much force as you can to make
sure it stays perfectly.
Step 5:
Make sure the Mount Kit stays firmly on the surface.
Make sure the mount will not interfere with the vehicle’s operating equipment and do not block your driving view.
More mounting solutions such as Windshield mount and Vent Clip mount are available at Seidio.com. Please
check on our website for more updates.
