Figure 9
Insert shelf holders (11) into holes on
side panels.
Place adjustable shelf (K) onto the shelf
holder (11).
Make sure the shelf holder (11)
holds the shelf (K) firmly.
Figure 10
Attach anti-tipping hardware (12)
to the back of the upper back panel
(D) as shown in figure 10.
Tighten screws using Philips
screwdriver.
Mark two desired locations on wall and
drill two 3/16" holes.
Then, Insert plastic anchors into the two
holes on wall as shown. Attach the
anti-tipping hardware to the wall using
screws as shown.
Finally, move item close to the wall and
secure with plastic straps
Anti-tipping hardware must be used for
this product to avoid tipping and injury.