Figure 1
INSERT 3PCS CAM-BOLT (A), AND 12PCS
WOOD DOWEL (B) INTO PREDRILLED HOLES
ON FRONT AND BACK RAILS (11&12) , AND
FIT INTO CORRESPONDING HOLES ON ENDS
OF WOOD CONNECTER (13). INSERT 3PCS
CAM-LOCK (C) INTO BIG HOLES ON
UNDERSIDE OF WOOD CONNECTER (13)
WITH SLOT FOR SCREWDRIVER FACING
OUTWARD. ROTATE CAM-LOCK (C)
CLOCKWISE TO SECURE CAM-BOLT (A). THEN
INSERT 3PCS FLAT HEAD LONG SCREW (D)
THROUGH PREDRILLED HOLES ON BACK RAIL
(12) AND TIGHTEN INTO END OF WOOD
CONNECTER (13). AS FIGURE 1 SHOWN.
Figure 2
INSERT 4PCS WOOD DOWELS (B) INTO
PREDRILLED HOLES ON LEFT AND RIGHT
SIDE PANELS (6& 7) AND FIT INTO
CORRESPONDING HOLES ON LEFT AND
RIGHT FRONT PANELS (3&4). INSERT 12PCS
FLAT HEAD LONG SCREW(D) THROUGH
PREDRILLED HOLES ON WOOD BARS ON
INSIDE OF LEFT AND RIGHT SIDE PANELS
(6.7) AND TIGHTEN INTO CORRESPONDING
HOLES ON BACK OF LEFT AND RIGHT FRONT
PANELS (3.4). AS FIGURE 2 SHOWN.
Figure 3
INSERT 2PCS CAM-BOLTS (A), 12PCS WOOD
DOWELS (B) INTO PREDRILLED HOLES ON
EDGES OF LEFT AND RIGHT FRONT PANELS
(3.4), LEFT AND RIGHT SIDE PANELS (6.7)
AND FIT INTO CORRESPONDING HOLES ON
ENDS OF PARTS (5,11.12). INSERT 2PCS
CAM-LOCKS (C) INTO BIG HOLES ON BACK OF
MIDDLE FRONT PANEL (5) WITH SLOT FOR
SCREWDRIVER FACING OUTWARD. ROTATE
CAM-LOCKS (C) CLOCKWISE TO SECURE
CAM-BOLTS (A). INSERT 4PCS FLAT HEAD
LONG SCREW(D) THROUGH PREDRILLED
HOLES ON END OF BACK RAIL (12) AND
TIGHTEN INTO CORRESPONDING HOLES ON
INSIDE OF LEFT AND RIGHT SIDE PANELS
(6&7). AS FIGURE 3 SHOW
" TENNYSON "FIREPLACE
Assembly Instructions
For service questions, contact SEI at 1-800-633-5096
For sales inquiries, contact Sylvane at 1-800-934-9194 or visit www.sylvane.com.
