OPERATING INSTRUCTIONS
CONTROL PANEL OPERATING PROCEDURES
Control panel on the front unit
Flip down the front grill panel to reveal control panel
1 On/Off Main power button
2. On/Off Heater button
3.Adjustable Flame Brightness
4.Adjustable Log Brightness
5.Adjustable Timer
Control panel Introduction:
There are five buttons on the control panel
：
POWER“ ”
、
HEATER “ ”
、
FLAME “ ”
、
LOG
“
”
and TIMER “ ”,
(1)
POWER Button
A.Turn the firebox ON and OFF.
B. Child Lock: turn the unit on and hold POWER button for at least 5 seconds until you hear a beep sound (and the log
blinks) to enter the Child Lock mode. To turn off the child lock mode, please press and hold the POWER button again for
at least 5 seconds until you hear the beep sound (and the log blinks).
(2) HEATER Button .
A. HEATER switch: adjust the temperature setting from 62 ° F --- 82 ° F - ON (17 ° C --- 27 ° C). When t he heater is left
running before the firebox is turned off, the heater will automatically turn on when the firebox is turned on
When the cycle passes 82 degree, the unit will enter manual operation and display “ON”. To turn heater off, please press
Heater or Power button.
B. The HEATER display unit switching function, When the firebox is on, press and hold the HEATER button for at least 5
seconds to switch temperature reading from ° F to ° C or vice versa. (
℉
is the default)
(3) FLAME Button
Adjust the flame brightness level 5 – 4 – 3 – 2 - 1 and off. (5 at the brightest and 1 at the dimmest)
4) LOG Button
Adjust log brightness level 5 – 4 – 3 – 2 - 1 and off. (5 at the brightest and 1 at the dimmest)
(5)Timer Button
Adjust timer setting: OFF - 30 (min) -1H - 2H - 3H – 4H – 5H – 6H – 7H – 8H - 9Hour.
ELECTRICAL CONNECTION
A 15 AMP,120 Volts,60 Hz circuit with a properly grounded outlet is required. It’s recommended that the fireplace will
be on a dedicated circuit as other appliances on the same circuit may cause the circuit breaker to trip or blow the fuse to
blow when the heater is in operation.
