6.
TIGHTEN CAM-BOLTS (3) INTO PREDRILLED HOLES ON UPSIDE OF UPPER SHELF (F) AND FIT
INTO CORRESPONDING HOLES ON BOTTOM EDGES OF PARTS (A, B, D, E). INSERT CAM-LOCKS (4)
INTO BIG HOLE ON PARTS (A, B, D, E) WITH SLOT FOR SCREWDRIVER FACING OUTWARD.
ROTATE CAM-LOCKS (4) CLOCKWISE TO SECURE CAM-BOLTS (3). PUSH COVERS (5) INTO
CAM-LOCKS (4). ASSEMBLE TOP PANEL (C) IN SAME MANNER. AS SHOWN IN FIGURE 4.
7.
INSERT SMALL FLAT HEAD WOOD SCREW (6) THROUGH MAGNET PLATE (8) AND TIGHTEN INTO
PREDRILLED HOLE ON UPPER DOOR (G). INSERT SMALL FLAT HEAD WOOD SCREWS (6)
THROUGH METAL PLATE (10) AND TIGHTEN INTO PREDRILLED HOLES ON UPPER DOOR (G).
INSERT SMALL MACHINE SCREW (9) THROUGH PREDRILLED HOLES ON UPPER DOOR (G), METAL
PLATE (10) AND TIGHTEN INTO HANDLE (11). AS SHOWN IN FIGURE 5.
8.
INSERT SMALL FLAT HEAD WOOD SCREWS (6) THROUGH THE HOLES ON HINGES (7) AND
TIGHTEN INTO PREDRILLED HOLES ON EDGES OF UPPER RIGHT SIDE PANEL (D) AND UPPER
DOOR (G). INSERT PAN HEAD WOOD SCREWS (12) THROUGH END OF MAGNET (13) AND TIGHTEN
INTO PREDRILLED HOLES ON UNDERSIDE OF TOP PANEL (C). AS SHOWN IN FIGURE 5.
FIGURE 4
FIGURE 5
SHOWN BACK VIEW FOR ASSEMBLY PURPOSES
9.
PLEASE BE CAREFULLY ATTACH LARGE BACK MIRRORS (Q) INTO GROOVES OF PARTS (A, B, C, D,
E, F), AND ATTACH UPPER BACK PANELS (H) INTO SLOTS OF REAR EDGES OF PARTS (A, B, C, D, E,
F). INSERT PAN HEAD WOOD SCREWS (12) THROUGH PREDRILLED HOLES ON UPPER BACK
PANELS (H) AND TIGHTEN INTO CORRESPONDING HOLES ON REAR EDGES OF PARTS (A, B, C, D,
E, F). AS SHOWN IN FIGURE 6.
