(H) UPPER BACK PANEL
2PCS
(R) SMALL BACK MIRROR
2PCS
(I) LOWER RIGHT BACK RAIL
1PC
(S) GLASS SHELF
3PCS
(J) LOWER LEFT BACK RAIL
1PC
ASSEMBLY INSTRUCTIONS
1.
SELECT A SMOOTH, SOFT SURFACE TO PREVENT SCRATCHING FINISH.
2.
YOU MAY NEED A PHILLIPSSCREWDRIVER.
3.
INSERT WOOD DOWELS (2) INTO PREDRILLED HOLES ON EDGE OF UPPER LEFT BACK RAIL (B)
AND FIT INTO CORRESPONDING HOLES ON UPPER RIGHT BACK RAIL (A). INSERT LARGE FLAT
HEAD WOOD SCREWS (1) THROUGH PREDRILLED HOLES ON UPPER RIGHT BACK RAIL (A) AND
TIGHTEN INTO CORRESPONDING HOLES ON UPPER LEFT BACK RAIL (B). AS SHOWN IN FIGURE 1.
4.
INSERT SMALL FLAT HEAD WOOD SCREWS (6) THROUGH METAL SHADE (16) AND TIGHTEN INTO
PREDRILLED HOLES ON UNDERSIDE OF TOP PANEL (C). AS SHOWN IN FIGURE 2.
5.
INSERT SMALL FLAT HEAD WOOD SCREWS (6) THROUGH THE HOLDER OF LIGHT (17) AND
TIGHTEN INTO PREDRILLED HOLES ON UNDERSIDE OF TOP PANEL (C). LEAD THE POWER CORD
ON THE LIGHT (17) THROUGH THE HOLE ON TOP PANEL (C) TO UPSIDE OF TOP PANEL (C). AS
SHOWN IN FIGURE 3.
FIGURE 1
FIGURE 2
FIGURE 3
