10
[en]
Quick Installation Guide
Finding the TPG-125 in the Network
Once the TPG-125 is connected to the network, it checks whether an IP address
can be obtained from the boot protocols BOOTP or DHCP. If this is not the case,
the TPG-125 assigns itself an IP address via ZeroConf from the address range
(169.254.0.0/16) which is reserved for ZeroConf.
The 'InterCon-NetTool' has been developed by SEH Computertechnik GmbH for
the administration of SEH devices. By means of this tool you can find the TPG-
125's IP address and, if necessary, assign a suitable IP address to the TPG-125, as
described below.
’Installing and Starting the InterCon-NetTool’
10
’Finding the TPG-125 (Determining the IP Address)’
11
’Changing the IP Address’
11
The client, printer and TPG-125 must be assigned to the same local network
segment.
Installing and Starting the InterCon-NetTool
Proceed as follows:
1.
Download the installation file for the InterCon-NetTool from the homepage
of the SEH Computertechnik GmbH:
http://www.seh-technology.com/services/downloads/
download-thinprint-gateways/tpg-125.html
2.
Start the InterCon-NetTool installation file.
3.
Select the desired language.
4.
Follow the installation routine.
The InterCon-NetTool will be installed on your client.
5.
Start the InterCon-NetTool on your client.
Summary of Contents for ThinPrint TPG-125
Page 13: ...Quick Installation Guide en 13 ...
Page 14: ...14 en Quick Installation Guide ...
Page 25: ...Quick Installation Guide de 25 ...
Page 27: ...Quick Installation Guide 27 ...