SEH primos, User Manual

Page: 42 / 78

primos User Manual Print
38
Configuring Wide-Area AirPrint on primos
Requirements

A DNS server is operated in your network.

A DNS server is configured in primos

16.
1. Start the primos Control Center.
2. Select
PRINTING – Settings .
3. Configure the Wide-Area AirPrint parameters; table 9

38.
4. Click Save to confirm.

The settings are saved.
Table 9: Wide-Area AirPrint parameters
Configuring a Conditional Forwarder on the DNS Server
As an example the configuration procedure on Windows Server 2012 is described.
Requirements

In primos Wide-Area AirPrint has been configured

38.

A DNS server is operated in your network.

You are logged on to Windows Server 2012 as administrator.
1. Start the DNS Manager .
2. Rightclick on Conditional Forwarders and from the context menu choose New
Conditional Forwarder .
The dialog New Conditional Forwarder appears.
3. In the DNS Domain box, enter the primos subdomain.
4. In the area IP addresses of the master servers enter in the field IP Address the IPv4
address of primos.
Windows server 2012 validates your input. If the validation is successful, a green
check mark appears and you can click 'OK'.
5. Click OK to confirm.

The conditional forwarder is saved.
Parameters Description
Wide-Area AirPrint Enables/disables Wide-Area AirPrint.
primos subdomain Wide-Area AirPrint domain name for which a conditional forwarder to
primos is configured on the DNS server.
Printers to be published via
Wide-Area AirPrint Defines the printers that can be used via Wide-Area AirPrint.
Multicast publishing Enables/disables the standard mechanism for publishing queues in the
network (via multicast).
If you deactivate this option, printers will only be made available via Wide-
Area AirPrint.