SEH myUTN-50, Quick Installation Manual, Page: 5 / 32

Quick Installation Guide [en] 5
Technical Data
*The shield connection of the RJ45 connector is connected to the shield of the device port. This
connection must be taken into account when arranging your network cabling. For more
information, please consult your retailer.
Properties Values
Device Connection - 2 x USB 2.0 HS (may be extended to 5 ports)
Network Connection
logical:
physical:
- IEEE 802.3
- RJ-45 (STP Cat.5)
Operating environment - Ambient temperature: 5 - 40 °C
- Relative humidity 20 - 80 %
Dimensions - Length 98 mm
- Width 81 mm
- Height 31 mm
- Weight 100 g
1) Link LED (green):
The link LED shows an existing connection to
the network.
2) Activity LED (yellow):
The LED indicates the reception of data
packets from the network.
3) Status LED (green):
The LED indicates that the device is
operational.
4) Reset button
5) Connector for the included power pack.
6) Network connector (RJ-45) for 100BaseTX and
10BaseT *
7) USB port 2 (may be extended using a USB hub)
8) USB port 1
9) Kensington security slot